Dry air generators
Standard information
-
Clean, oil-free air can be supplied from a connection to an air source, and the outlet dew point can be selected from −10°C to −60°C or less to meet the requirements of the application.
Features
- High efficiency and high quality (with built-in air dryer).
- Pressure adjustment valve and mist filter are provided as standard equipment.
- CO2 is removed (AT-40CD model).
- Our integrated system of manufacturing and service enables the nationwide support provided by our service personnel and assures that customers can use our products with confidence.
Specification
Standard Specification
Model number | Flow rate(ℓ/min.) | Pressure (MPa) |
DP (℃) |
Power supply | Unit dimension WDH (mm) |
Weight (kg) |
|
---|---|---|---|---|---|---|---|
Inlet | Outlet | ||||||
AT-40D | 60 | 40 | 0.69 | -60℃ or less | AC100V 1A | 300×330×600 | 21 |
AT-90D | 135 | 90 | 0.69 | -60℃ or less | AC100V 1A | 300×330×600 | 26 |
AT-220D | 315 | 220 | 0.69 | -60℃ or less | AC100V 1A | 300×320×650 | 31 |
※横スクロールで全体を表示
The specifications on this page may change without notice.
Dry air generators With built-in compressors
Standard information
-
These dry air generators use a built-in quiet type compressor developed for use with physics and chemistry instruments. Clean, oil-free air can be supplied by simply switching on the unit, and the outlet dew point can be selected from −10°C to −60°C or less to meet the requirements of the application.
Features
- Low noise (46 dB dB(A)/1 m).
- High efficiency and high quality (with built-in air dryer).
- Pressure adjustment valve and mist filter are provided as standard equipment.
- CO2 is removed (AT-40CD model).
- Our integrated system of manufacturing and service enables the nationwide support provided by our service personnel and assures that customers can use our products with confidence.
Applications
- For physics and chemistry instruments (Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) spectroscopy, inductively coupled plasma mass spectrometry (ICP-MS), evaporative light scattering detectors (ELSD), atomic absorption photometers, etc.)
- For control and measurement (auto-samplers, air bearings, etc.)
- Thermal analysis, viscoelasticity instruments, etc.
Specification
Standard Specification
Model number | Electric motor (kw) |
Flow rate (ℓ/min.) |
Maximum normal operation pressure (MPa) |
DP (℃) |
Power supply | Rated current(A) 50/60Hz |
Quantity of heat (kJ/h) |
Unit dimension WDH (mm) |
Weight (kg) |
Built-in compressor | |
---|---|---|---|---|---|---|---|---|---|---|---|
AT-20H | 0.4 | 20 | 0.49 | -60℃ or less | AC100V 10A | 7.6/7.7 | 1256 | 440×570×880 | 60 | ○ | |
AT-20MS | 0.2 | 20 | 0.49 | -15℃ or less | AC100V 10A | 4.1/3.9 | 628 | 360×550×660 | 50 | ○ | |
AT-40M-S | 0.4 | 40 | 0.49 | -15℃ or less | AC100V 10A | 7.6/7.7 | 1256 | 360×600×705 | 50 | ○ | |
AT-70SB | 0.75 | 70 | 0.49 | -15℃ or less | AC100V 15A | 11.0/10.4 | 2355 | 450×700×660 | 76 | ○ | |
AT-35HA | 0.75 | 35 | 0.49 | -60℃ or less | AC100V 15A | 11.0/10.4 | 2355 | 480×770×950 | 120 | ○ |
※横スクロールで全体を表示
The specifications on this page may change without notice.